When you hit the road for a trip, you have smart phones, tablets, iPads, GPS navigators, camera's, and even a high powered LED torch which charges from USB.
This dual USB charger will solve all of your charging problems keeping everybody in the car happy.
Standard size mounting hole 1.41" (36mm) x .86" (22mm). This is the standard size of most switch holes in modern vehicles.
Installation of the Dual USB Charger is a snap (quite literally). Once your switch blank is removed, it is quite simply a matter of pushing the Dual USB Charger in place. They are nice snug fit, so be prepared to put a little pressure on them. Once in place they are held tight by locking tabs and do not budge.
The wiring is as simple as connecting two wires. The positive wire is connected to you preferred power source. You have several options here:
- a) Connect to an "IGN" source to have the Dual USB Charger come on when you switch on your car
- b) Connect to an "ALWAYS ON" source if you prefer to leave them on the entire time.
- If you are looking specifically for Toyota vehicles, please check our other items as we have Dash Switches to fit most Toyota four wheel drives:
Charges an iPad from 0 - 100% in 4 - 5 hours (depending on model)
Illuminated blue volt meter
Surface size is 2" (50mm) x 1" (24mm)
Waterproof rating of IP66
Fits into blank switch plates of most vehicles
Works with both 12V & 24V Vehicles
|USB Number: ||2 (Dual USB)|
|Input Voltage: ||DC 12-24V|
|Output Voltage: ||DC5V 2.1A each port|